# Installation

If you want to setup Haqq fullnode manually follow the steps below

## Update and upgrade

```
sudo apt update && sudo apt upgrade -y
```

## Install GO

```
if ! [ -x "$(command -v go)" ]; then
  ver="1.19.3"
  cd $HOME
  wget "https://golang.org/dl/go$ver.linux-amd64.tar.gz"
  sudo rm -rf /usr/local/go
  sudo tar -C /usr/local -xzf "go$ver.linux-amd64.tar.gz"
  rm "go$ver.linux-amd64.tar.gz"
  echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> ~/.bash_profile
  source ~/.bash_profile
fi
```

## Install node

```
cd $HOME
rm -rf haqq
git clone https://github.com/haqq-network/haqq.git
cd haqq
git checkout v1.4.1
make install
```

## Setting up vars

You should replace values in <>\
\<YOUR\_MONIKER> Here you should put name of your moniker (validator) that will be visible in explorer\
\<YOUR\_WALLET> Here you shoud put the name of your wallet

```
HAQQ_WALLET="<YOUR_WALLET_NAME>"
HAQQ_NODENAME="<YOUR_MONIKER>"
HAQQ_CHAIN_ID=""
```

```
echo "
export HAQQ_WALLET=${HAQQ_WALLET}
export HAQQ_NODENAME=${HAQQ_NODENAME}
export HAQQ_CHAIN_ID=${HAQQ_CHAIN_ID}
" >> $HOME/.bash_profile

source $HOME/.bash_profile
```

## Configure your node

```
haqqd config chain-id ${HAQQ_CHAIN_ID}
```

## Initialize your node

```
haqqd init ${HAQQ_NODENAME} --chain-id ${HAQQ_CHAIN_ID}
```

## Download genesis & addrbook

```
curl -Ls "https://snapshots.l0vd.com/haqq-testnet/genesis.json" > $HOME/.haqqd/config/genesis.json
curl -Ls "https://snapshots.l0vd.com/haqq-testnet/addrbook.json" > $HOME/.haqqd/config/addrbook.json
```

## (OPTIONAL) Set custom ports

### If you want to use non-default ports

```
HAQQ_PORT=<SET_CUSTOM_PORT> #Example: HAQQ_PORT=56 (numbers from 1 to 64)
```

```
sed -i.bak -e "s%^proxy_app = \"tcp://127.0.0.1:26658\"%proxy_app = \"tcp://127.0.0.1:${HAQQ_PORT}658\"%; s%^laddr = \"tcp://127.0.0.1:26657\"%laddr = \"tcp://127.0.0.1:${HAQQ_PORT}657\"%; s%^pprof_laddr = \"localhost:6060\"%pprof_laddr = \"localhost:${HAQQ_PORT}060\"%; s%^laddr = \"tcp://0.0.0.0:26656\"%laddr = \"tcp://0.0.0.0:${HAQQ_PORT}656\"%; s%^prometheus_listen_addr = \":26660\"%prometheus_listen_addr = \":${HAQQ_PORT}660\"%" /$HOME/.haqqd/config/config.toml
sed -i.bak -e "s%^address = \"tcp://0.0.0.0:1317\"%address = \"tcp://0.0.0.0:${HAQQ_PORT}317\"%; s%^address = \"tcp://localhost:1317\"%address = \"tcp://0.0.0.0:${HAQQ_PORT}317\"%; s%^address = \":8080\"%address = \":${HAQQ_PORT}080\"%; s%^address = \"0.0.0.0:9090\"%address = \"0.0.0.0:${HAQQ_PORT}090\"%; s%^address = \"localhost:9090\"%address = \"localhost:${HAQQ_PORT}090\"%; s%^address = \"0.0.0.0:9091\"%address = \"0.0.0.0:${HAQQ_PORT}091\"%; s%^address = \"localhost:9091\"%address = \"localhost:${HAQQ_PORT}091\"%; s%^address = \"0.0.0.0:8545\"%address = \"0.0.0.0:${HAQQ_PORT}545\"%; s%^ws-address = \"0.0.0.0:8546\"%ws-address = \"0.0.0.0:${HAQQ_PORT}546\"%" /$HOME/.haqqd/config/app.toml
```

```
haqqd config node tcp://localhost:${HAQQ_PORT}657
```

## Set seeds and peers

```
PEERS="@haqq-testnet.peers.l0vd.com:"
sed -i -e "s/^seeds *=.*/seeds = \"$SEEDS\"/; s/^persistent_peers *=.*/persistent_peers = \"$PEERS\"/" $HOME/.haqqd/config/config.toml
```

## Config pruning

```
pruning="custom"
pruning_keep_recent="100"
pruning_keep_every="0"
pruning_interval="50"
sed -i -e "s/^pruning *=.*/pruning = \"$pruning\"/" $HOME/.haqqd/config/app.toml
sed -i -e "s/^pruning-keep-recent *=.*/pruning-keep-recent = \"$pruning_keep_recent\"/" $HOME/.haqqd/config/app.toml
sed -i -e "s/^pruning-keep-every *=.*/pruning-keep-every = \"$pruning_keep_every\"/" $HOME/.haqqd/config/app.toml
sed -i -e "s/^pruning-interval *=.*/pruning-interval = \"$pruning_interval\"/" $HOME/.haqqd/config/app.toml
```

## Set minimum gas price and null indexer

```
sed -i -e "s/^minimum-gas-prices *=.*/minimum-gas-prices = \"0aISLM\"/" $HOME/.haqqd/config/app.toml
sed -i -e "s/^indexer *=.*/indexer = \"null\"/" $HOME/.haqqd/config/config.toml
```

## Create Service

```
sudo tee /etc/systemd/system/haqqd.service > /dev/null <<EOF
[Unit]
Description=Haqq testnet
After=network-online.target

[Service]
User=$USER
ExecStart=$(which haqqd) start
Restart=on-failure
RestartSec=3
LimitNOFILE=65535

[Install]
WantedBy=multi-user.target
EOF
```

## Reset blockchain info and restart your node

```
sudo systemctl daemon-reload
sudo systemctl enable haqqd
haqqd tendermint unsafe-reset-all --home $HOME/.haqqd --keep-addr-book
sudo systemctl restart haqqd && sudo journalctl -u haqqd -f -o cat
```

## (OPTIONAL) Use State Sync

### [State Sync](/testnets/haqq/installation-guide.md)

## Starting a validator

### 1. Add a new key

```
haqqd keys add ${HAQQ_WALLET}
```

#### (OR)

### 1. Recover your key

```
haqqd keys add ${HAQQ_WALLET} --recover
```

```
HAQQ_WALLET_ADDR=$(haqqd keys show ${HAQQ_WALLET} -a)
echo "export HAQQ_WALLET_ADDR=${HAQQ_WALLET_ADDR}" >> $HOME/.bash_profile

source $HOME/.bash_profile
```

## 2. Create validator

{% hint style="info" %}
Wait until the node is synchronized.
{% endhint %}

```
haqqd tx staking create-validator \
--amount 1000000aISLM \
--commission-max-change-rate "0.01" \
--commission-max-rate "0.20" \
--commission-rate "0.1" \
--min-self-delegation "1" \
--details "" \
--pubkey $(haqqd tendermint show-validator) \
--moniker ${HAQQ_NODENAME} \
--chain-id ${HAQQ_CHAIN_ID} \
--from ${HAQQ_WALLET_ADDR} \
--gas-prices 0.25aISLM \
--gas-adjustment 1.5 \
--gas auto \
--yes
```


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://chain-services.l0vd.com/testnets/haqq/installation-guide.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.