> For the complete documentation index, see [llms.txt](https://chain-services.l0vd.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://chain-services.l0vd.com/testnets/ollo/installation-guide.md).

# Installation

If you want to setup Ollo fullnode manually follow the steps below

## Update and upgrade

```
sudo apt update && sudo apt upgrade -y
```

## Install GO

```
if ! [ -x "$(command -v go)" ]; then
  ver="1.19.3"
  cd $HOME
  wget "https://golang.org/dl/go$ver.linux-amd64.tar.gz"
  sudo rm -rf /usr/local/go
  sudo tar -C /usr/local -xzf "go$ver.linux-amd64.tar.gz"
  rm "go$ver.linux-amd64.tar.gz"
  echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> ~/.bash_profile
  source ~/.bash_profile
fi
```

## Install node

```
cd $HOME
git clone https://github.com/OLLO-Station/ollo.git
cd ollo
git checkout v0.0.1
make install
```

## Setting up vars

You should replace values in <>\
\<YOUR\_MONIKER> Here you should put name of your moniker (validator) that will be visible in explorer\
\<YOUR\_WALLET> Here you shoud put the name of your wallet

```
echo "export OLLO_WALLET="<YOUR_WALLET_NAME>"" >> $HOME/.bash_profile
echo "export OLLO_NODENAME="<YOUR_MONIKER>"" >> $HOME/.bash_profile
echo "export OLLO_CHAIN_ID="ollo-testnet-1"" >> $HOME/.bash_profile
source $HOME/.bash_profile
```

## Configure your node

```
ollod config chain-id $OLLO_CHAIN_ID
```

## Initialize your node

```
ollod init $OLLO_NODENAME --chain-id $OLLO_CHAIN_ID
```

## Download genesis

```
wget "$HOME/.ollo/config/genesis.json" https://raw.githubusercontent.com/OLLO-Station/networks/master/ollo-testnet-1/genesis.json
```

## (OPTIONAL) Set custom ports

### If you want to use non-default ports

```
OLLO_PORT=<SET_CUSTOM_PORT> #Example: OLLO_PORT=56 (numbers from 1 to 64)
```

```
sed -i.bak -e "s%^proxy_app = \"tcp://127.0.0.1:26658\"%proxy_app = \"tcp://127.0.0.1:${OLLO_PORT}658\"%; s%^laddr = \"tcp://127.0.0.1:26657\"%laddr = \"tcp://127.0.0.1:${OLLO_PORT}657\"%; s%^pprof_laddr = \"localhost:6060\"%pprof_laddr = \"localhost:${OLLO_PORT}060\"%; s%^laddr = \"tcp://0.0.0.0:26656\"%laddr = \"tcp://0.0.0.0:${OLLO_PORT}656\"%; s%^prometheus_listen_addr = \":26660\"%prometheus_listen_addr = \":${OLLO_PORT}660\"%" $HOME/.ollo/config/config.toml
sed -i.bak -e "s%^address = \"tcp://0.0.0.0:1317\"%address = \"tcp://0.0.0.0:${OLLO_PORT}317\"%; s%^address = \":8080\"%address = \":${OLLO_PORT}080\"%; s%^address = \"0.0.0.0:9090\"%address = \"0.0.0.0:${OLLO_PORT}090\"%; s%^address = \"0.0.0.0:9091\"%address = \"0.0.0.0:${OLLO_PORT}091\"%; s%^address = \"0.0.0.0:8545\"%address = \"0.0.0.0:${OLLO_PORT}545\"%; s%^ws-address = \"0.0.0.0:8546\"%ws-address = \"0.0.0.0:${OLLO_PORT}546\"%" $HOME/.ollo/config/app.toml
```

## Set seeds and peers

```
SEEDS=""
PEERS="a99fc4e81770ca32d574cac2e8680dccc9b55f74@18.144.61.148:26656,70ba32724461c7ed4ec8d6ddc8b5e0b1cfb9e237@54.219.57.63:26656,7864a2e4b42e5af76a83a8b644b9172fa1e40fa5@52.8.174.235:26656"
sed -i -e "s/^seeds *=.*/seeds = \"$SEEDS\"/; s/^persistent_peers *=.*/persistent_peers = \"$PEERS\"/" $HOME/.ollo/config/config.toml
```

## Config pruning

```
pruning="custom"
pruning_keep_recent="100"
pruning_keep_every="0"
pruning_interval="50"
sed -i -e "s/^pruning *=.*/pruning = \"$pruning\"/" $HOME/.ollo/config/app.toml
sed -i -e "s/^pruning-keep-recent *=.*/pruning-keep-recent = \"$pruning_keep_recent\"/" $HOME/.ollo/config/app.toml
sed -i -e "s/^pruning-keep-every *=.*/pruning-keep-every = \"$pruning_keep_every\"/" $HOME/.ollo/config/app.toml
sed -i -e "s/^pruning-interval *=.*/pruning-interval = \"$pruning_interval\"/" $HOME/.ollo/config/app.toml
```

## Set minimum gas price and null indexer

```
sed -i -e "s/^minimum-gas-prices *=.*/minimum-gas-prices = \"0utollo\"/" $HOME/.ollo/config/app.toml
sed -i -e "s/^indexer *=.*/indexer = \"null\"/" $HOME/.ollo/config/config.toml
```

## Create Service

```
sudo tee /etc/systemd/system/ollod.service > /dev/null <<EOF
[Unit]
Description=Ollo
After=network-online.target

[Service]
User=$USER
ExecStart=$(which ollod) start
Restart=on-failure
RestartSec=3
LimitNOFILE=65535

[Install]
WantedBy=multi-user.target
EOF
```

## Reset blockchain info and restart your node

```
sudo systemctl daemon-reload
sudo systemctl enable ollod
ollod tendermint unsafe-reset-all --home $HOME/.ollo --keep-addr-book
sudo systemctl restart ollod && sudo journalctl -u ollod -f -o cat
```

## (OPTIONAL) Use State Sync

### [State Sync](/testnets/ollo/installation-guide.md)

## Starting a validator

### 1. Add a new key

```
ollod keys add $OLLO_WALLET
```

#### (OR)

### 1. Recover your key

```
ollod keys add $OLLO_WALLET --recover
```

### 2. Request tokens from faucet

### 3. Create validator

{% hint style="info" %}
Wait until the node is synchronized.
{% endhint %}

```
ollod tx staking create-validator \
--amount 1000000utollo \
--commission-max-change-rate "0.01" \
--commission-max-rate "0.20" \
--commission-rate "0.1" \
--min-self-delegation "1" \
--details "" \
--pubkey=$(ollod tendermint show-validator) \
--moniker $OLLO_NODENAME \
--chain-id $OLLO_CHAIN_ID \
--from $OLLO_WALLET \
--gas-prices 0.1utollo \
--gas-adjustment 1.5 \
--gas auto \
--yes
```


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://chain-services.l0vd.com/testnets/ollo/installation-guide.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.