# Installation

If you want to setup Archway fullnode manually follow the steps below

## Update and upgrade

```
sudo apt update && sudo apt upgrade -y
```

## Install GO

```
if ! [ -x "$(command -v go)" ]; then
  ver="1.19.3"
  cd $HOME
  wget "https://golang.org/dl/go$ver.linux-amd64.tar.gz"
  sudo rm -rf /usr/local/go
  sudo tar -C /usr/local -xzf "go$ver.linux-amd64.tar.gz"
  rm "go$ver.linux-amd64.tar.gz"
  echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> ~/.bash_profile
  source ~/.bash_profile
fi
```

## Install node

```
cd $HOME
rm -rf archway
git clone https://github.com/archway-network/archway.git
cd archway
git checkout v
make install
```

## Setting up vars

You should replace values in <>\
\<YOUR\_MONIKER> Here you should put name of your moniker (validator) that will be visible in explorer\
\<YOUR\_WALLET> Here you shoud put the name of your wallet

```
ARCHWAY_WALLET="<YOUR_WALLET_NAME>"
ARCHWAY_NODENAME="<YOUR_MONIKER>"
ARCHWAY_CHAIN_ID=""
```

```
echo "
export ARCHWAY_WALLET=${ARCHWAY_WALLET}
export ARCHWAY_NODENAME=${ARCHWAY_NODENAME}
export ARCHWAY_CHAIN_ID=${ARCHWAY_CHAIN_ID}
" >> $HOME/.bash_profile

source $HOME/.bash_profile
```

## Configure your node

```
archwayd config chain-id ${ARCHWAY_CHAIN_ID}
```

## Initialize your node

```
archwayd init ${ARCHWAY_NODENAME} --chain-id ${ARCHWAY_CHAIN_ID}
```

## Download genesis & addrbook

```
curl -Ls "https://snapshots.l0vd.com/archway-mainnet/genesis.json" > $HOME/.archway/config/genesis.json
curl -Ls "https://snapshots.l0vd.com/archway-mainnet/addrbook.json" > $HOME/.archway/config/addrbook.json
```

## (OPTIONAL) Set custom ports

### If you want to use non-default ports

```
ARCHWAY_PORT=<SET_CUSTOM_PORT> #Example: ARCHWAY_PORT=56 (numbers from 1 to 64)
```

```
sed -i.bak -e "s%^proxy_app = \"tcp://127.0.0.1:26658\"%proxy_app = \"tcp://127.0.0.1:${ARCHWAY_PORT}658\"%; s%^laddr = \"tcp://127.0.0.1:26657\"%laddr = \"tcp://127.0.0.1:${ARCHWAY_PORT}657\"%; s%^pprof_laddr = \"localhost:6060\"%pprof_laddr = \"localhost:${ARCHWAY_PORT}060\"%; s%^laddr = \"tcp://0.0.0.0:26656\"%laddr = \"tcp://0.0.0.0:${ARCHWAY_PORT}656\"%; s%^prometheus_listen_addr = \":26660\"%prometheus_listen_addr = \":${ARCHWAY_PORT}660\"%" /$HOME/.archway/config/config.toml
sed -i.bak -e "s%^address = \"tcp://0.0.0.0:1317\"%address = \"tcp://0.0.0.0:${ARCHWAY_PORT}317\"%; s%^address = \"tcp://localhost:1317\"%address = \"tcp://0.0.0.0:${ARCHWAY_PORT}317\"%; s%^address = \":8080\"%address = \":${ARCHWAY_PORT}080\"%; s%^address = \"0.0.0.0:9090\"%address = \"0.0.0.0:${ARCHWAY_PORT}090\"%; s%^address = \"localhost:9090\"%address = \"localhost:${ARCHWAY_PORT}090\"%; s%^address = \"0.0.0.0:9091\"%address = \"0.0.0.0:${ARCHWAY_PORT}091\"%; s%^address = \"localhost:9091\"%address = \"localhost:${ARCHWAY_PORT}091\"%; s%^address = \"0.0.0.0:8545\"%address = \"0.0.0.0:${ARCHWAY_PORT}545\"%; s%^ws-address = \"0.0.0.0:8546\"%ws-address = \"0.0.0.0:${ARCHWAY_PORT}546\"%" /$HOME/.archway/config/app.toml
```

```
archwayd config node tcp://localhost:${ARCHWAY_PORT}657
```

## Set seeds and peers

```
PEERS="@archway-mainnet.peers.l0vd.com:"
sed -i -e "s/^seeds *=.*/seeds = \"$SEEDS\"/; s/^persistent_peers *=.*/persistent_peers = \"$PEERS\"/" $HOME/.archway/config/config.toml
```

## Config pruning

```
pruning="custom"
pruning_keep_recent="100"
pruning_keep_every="0"
pruning_interval="50"
sed -i -e "s/^pruning *=.*/pruning = \"$pruning\"/" $HOME/.archway/config/app.toml
sed -i -e "s/^pruning-keep-recent *=.*/pruning-keep-recent = \"$pruning_keep_recent\"/" $HOME/.archway/config/app.toml
sed -i -e "s/^pruning-keep-every *=.*/pruning-keep-every = \"$pruning_keep_every\"/" $HOME/.archway/config/app.toml
sed -i -e "s/^pruning-interval *=.*/pruning-interval = \"$pruning_interval\"/" $HOME/.archway/config/app.toml
```

## Set minimum gas price and null indexer

```
sed -i -e "s/^minimum-gas-prices *=.*/minimum-gas-prices = \"1000000000000aarch\"/" $HOME/.archway/config/app.toml
sed -i -e "s/^indexer *=.*/indexer = \"null\"/" $HOME/.archway/config/config.toml
```

## Create Service

```
sudo tee /etc/systemd/system/archwayd.service > /dev/null <<EOF
[Unit]
Description=Archway mainnet
After=network-online.target

[Service]
User=$USER
ExecStart=$(which archwayd) start
Restart=on-failure
RestartSec=3
LimitNOFILE=65535

[Install]
WantedBy=multi-user.target
EOF
```

## Reset blockchain info and restart your node

```
sudo systemctl daemon-reload
sudo systemctl enable archwayd
archwayd tendermint unsafe-reset-all --home $HOME/.archway --keep-addr-book
sudo systemctl restart archwayd && sudo journalctl -u archwayd -f -o cat
```

## (OPTIONAL) Use State Sync

### [State Sync](/mainnets/archway/installation-guide.md)

## Starting a validator

### 1. Add a new key

```
archwayd keys add ${ARCHWAY_WALLET}
```

#### (OR)

### 1. Recover your key

```
archwayd keys add ${ARCHWAY_WALLET} --recover
```

```
ARCHWAY_WALLET_ADDR=$(archwayd keys show ${ARCHWAY_WALLET} -a)
echo "export ARCHWAY_WALLET_ADDR=${ARCHWAY_WALLET_ADDR}" >> $HOME/.bash_profile

source $HOME/.bash_profile
```

## 2. Create validator

{% hint style="info" %}
Wait until the node is synchronized.
{% endhint %}

```
archwayd tx staking create-validator \
--amount 1000000aarch \
--commission-max-change-rate "0.01" \
--commission-max-rate "0.20" \
--commission-rate "0.1" \
--min-self-delegation "1" \
--details "" \
--pubkey $(archwayd tendermint show-validator) \
--moniker ${ARCHWAY_NODENAME} \
--chain-id ${ARCHWAY_CHAIN_ID} \
--from ${ARCHWAY_WALLET_ADDR} \
--gas-prices 1000000000000aarch \
--gas-adjustment 1.5 \
--gas auto \
--yes
```


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://chain-services.l0vd.com/mainnets/archway/installation-guide.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.